亚洲日本韩国一区二区,亚洲十八禁在线一区,日韩精品一区二区大桥未久

BYD Lithium Battery Warehouse Forklift Sales Center- When the inspection agency conducts regular (initial) inspections, the inspection items should include the inspection of safety monitoring devices

The first step in operating an electric forklift to pick up goods is to drive close to the goods

It is a power technology update driven by the concept of energy conservation and environmental protection The equipment is equipped with an intelligent operating handle, which can be electrically lifted and moved, saving time and effort In response to the above problems, the safety inspection plan proposed in this section is as follows: Loading device: ① It is designed with a pallet positioning device and a cargo size over-limit sensor, which will issue an alarm signal when the cargo width, length, or height exceeds the limit; ② It is designed with a cargo overweight sensor, which will issue an alarm signal when the cargo is overweight; ③ It is designed with a cargo position over-tolerance detection sensor and a sensor for judging the presence or absence of cargo

If the operator's hands or shoes are stained with oil, it is easy to make operating errors and cause the forklift to lose control, so the operator should wipe his hands or shoes dry before driving Among them, Hangcha Group's high-performance compact electric drive axle is an integral electric axle developed for electric forklift products after several years

Therefore, once the mast of the forklift is found to be deformed, it must be repaired in time

Car body The body and frame of the forklift are integrated into one body and are made of profiled steel with resist welding

are important but easy to understand, so I won’t go into details here

The low-carbon and environmentally friendly characteristics of electric forklifts are in line with the theme of contemporary energy development

BYD Lithium Battery Warehouse Forklift Sales Center-

Electric truck manufacturers hope that everyone will pay attention to this

Below we will explain in detail the driving operation and steps of electric hydraulic transport trucks

The following BYD Forklift Editor will introduce the specific maintenance techniques for electric forklifts

To be on the safe side, the driver is advised to check whether the braking system of the electric pallet truck is normal, whether the emergency power-off button is normal, whether the battery is sufficiently charged, whether there is any damage, etc

The load range of electric transport trucks is relatively wide, ranging from one ton to ten tons What should you pay attention to when operating a forklift in winter? Do not operate the hydraulic system before the hydraulic control system oil becomes hot, otherwise the hydraulic components will be damaged, and in severe cases, a pump explosion accident will occur The following is a brief sharing by BYD Forklift: Carry out seasonal maintenance of equipment, test the antifreeze freezing point, and make it 5℃ lower than the local minimum temperature; the thermostat opening temperature is about 82℃; the battery electrolyte density reaches 1 Check whether the bearings are running well

So what are their specific functions? Let the BYD forklift editor share with you: What are the functions of BYD forklifts? 1

The application of wet braking has greatly improved the reliability of the drive axle Indeed, the openness of hardware configuration is almost the same as the opening up of the entire Apollo ecology The forklift mast cannot rise Most of the problems with the forklift's mast lifting are caused by oil leakage The installation sequence is the opposite of the disassembly sequence

Whether purchasing an electric transport truck, an electric stacker or a manual hydraulic forklift, in addition to considering its own site, environment and other conditions as well as requirements for battery life, product quality, etc

Each thing has its own use

BYD Lithium Battery Warehouse Forklift Sales Center-

The models and configurations of the two equipment are different

AGV is applied to forklifts, and the AMS automated management system, AGV hardware equipment and management system (NDC) are established to build a full-process logistics management system, realize dynamic monitoring of warehouse goods, and realize the traceability and visualization management of logistics transportation

It ensures the safety and normal operation of batteries and vehicles through a series of management and control

Electric forklifts are more practical and recommended for purchase, but the batteries need to be well maintained and can be used for a relatively long time

Today, the forklift editor will explain it to you

It is not allowed to operate with a single fork; 4

After the electric forklift starts, you need to drive the electric forklift to the front of the goods and enter the working position

Energy saving and environmental protection, simple and convenient operation

Note: The above sales volume includes domestic sales and overseas sales Its weight is determined based on the rated lifting capacity of the forklift, and it plays a balancing role when the forklift is loaded

(10) It is not allowed to use the inertia of braking to release objects

More environmentally friendly, no corrosion, lead-free, safe to use, and can be recycled even when its service life is up

Buyers only need to replace and maintain the parts in time according to the time in the parts service life detailed table provided by the electric pallet truck manufacturer

亚洲精品无码一二区a片-制服丝袜国产av无码-乱码午夜-极品国产内射-亚洲精品无码永久电影在线-亚洲综合一区二区三区四区五区

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info